Charging Control Board

 

XH-M601 Battery Charging Control Board 12V 

Product Introduction: 

1.  Name:12V charger power control board 
2.  Model:XH-M601 
3.  Power Supply Voltage:13.8-14.8V 
4.  Relay Operating Voltage:12.4V 
5.  Relay Disconnect Voltage:14.8V 
6.  Voltage Tolerance:+/-0.1V 
7.  Voltage Detection Way: DC voltmeter 
8.  Charging Type:12V storage battery 
9.  Potentiometer Adjustment:RP1 RP2 
10.  Size:50*32*18mm 

 

Potentiometer Adjustment: 

1. RP1:adjust storage battery start charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower) 
2. RP2:adjust storage battery disconnect charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower)

XH-M602 DIGI BATT CONTROL

Overview: 

 The XH M602 is a 220V home charger that’s able to change the charging voltage to charge a battery. The XH M602 can charge batteries such as 12V 24V 36V 48V 60V 72V 84V 96V. 

 

Features: 

 • Digital display 

 • Monitor real-time voltage, 

 • set value to start and stop Voltage, 

 • Effectively protect the battery from damage due to loss of power or overcharge. 

 Specification: 

 • Input voltage: AC 220V 

 • Display precision: 0.1v 

 • Control precision: 0.1v 

 • Output type: output switch 

 • Voltage error: +0.1v/-0.1v 

 • Application Field: 3.7v~120v lithium or storage battery 

 • Weight: 110g 

 • Size: 86*58*24mm

Instructions 

In the state of setting the voltage value, the start button functions as an up button, and the stop button functions as a down button Set the start voltage Under the normal display voltage state, press the start voltage button once to display the start charging voltage. Long press the start button, the digital screen flashes, and the start charging voltage value is set by the start and stop button. Set the stop voltage Under the normal display voltage state, press the stop voltage button once to display the stop charging voltage. Long press the stop button, the digital screen flashes and the charging voltage is stopped by the start and stop buttons. Reset Press and hold the start/stop button at the same time when the power is on, the digital screen displays 888, which is the restore the factory settings. Common battery charging voltage parameters (for reference only) Note: The charging current should not exceed 1/10 of the battery capacity. The charging voltage is generally not higher than 1.2 times the nominal voltage of the battery, i.e. 6V battery, the charging voltage should be between 6-7.2V. e.g. 12v can be converted to 12v-14.4v; 72v can be converted to 72v – 86.4v